Polycarbonate Mirror | Sheet
3mm and 6mm thick

Polycarbonate mirror sheet is intended for areas at high risk from impact such as mirrors in prisons, horse stable mirrors, hospital mirrors or similar applications where the significantly improved impact strength over standard acrylic mirror is required.

In fact, polycarbonate mirror is virtually unbreakable, with an impact strength of around 30 times that of acrylic mirror, and over 250 times greater than that of glass in equal sheet thickness.

Our polycarbonate mirrors are manufactured with the industry's toughest protective back-coating - which helps to protect against scratching during general use and preparation.

On this page you can buy polycarbonate mirror in full sheets.

Product Availability:

  • 3mm thick is normally from stock
  • 6mm thick may require additional 5/7 days for delivery
  • Additional notes:

    • Full sheets are a nominal 2440mm x 1220mm, but are generally oversized -0mm/+70mm
    • Polycarbonate mirror sheet is supplied with a protective mask on both sides
    • Polycarbonate mirror is not as rigid as glass and, as with all polycarbonate mirror, visual distortion can occur
    • Correct installation and sufficient material thickness can reduce visual distortion but may not completely eliminate it
    • Polycarbonate mirror is not a direct replacement for applications where glass mirror may be more suitable
    • A4 sheets of Polycarbonate Mirror can be purchased from our clearance stock page
A picture of Polycarbonate Mirror Sheet

Buying Options

Select Thickness
Select Colour
Select Dimension
Enter your required cut length in mm
Enter your required cut width in mm

This selection is not possible

Value out of Range : Check below

Important Information: Minimum cut length is 20mm
Maximum cut panel size is 3000mm x 1mm
nb Enter the largest dimension first

Price excluding VAT


Price including VAT